B+BTec KARAT 180 BG, Translation Of The Original Instructions

KARAT

®

 180

GB

OPERATING MANUAL KARAT® 180

   17

c)  

Wear hearing protection when diamond 

drilling.

 Exposure to noise can cause hearing 

loss.

d)  

When the bit is jammed, stop applying 

downward pressure and turn off the tool.

Investigate and take corrective actions to 

eliminate the cause of the bit jamming.

e)  

When restarting a diamond drill in the 

workpiece check that the bit rotates freely 

before starting.

 If the bit is jammed, it may 

not start, may overload the tool, or may cause 

the diamond drill to release from the work-

piece.

f )  

When securing the drill stand with 

anchors and fasteners to the workpiece, 

ensure that the anchoring used is capable 

of holding and restraining the machine 

during use.

 If the workpiece is weak or 

porous, the anchor may pull out causing the 

drill stand to release from the workpiece.

g) 

When securing the drill stand with a 

vacuum pad to the workpiece, install the 

pad on a smooth, clean, non-porous sur-

face. Do not secure to laminated surfaces 

such as tiles and composite coating. 

If the 

workpiece is not smooth, flat or well affixed, 

the pad may pull away from the workpiece.

Working safely with this machine is possible 

only when the operating and safety informa-

tion are read completely and the instruc-

tions contained therein are strictly followed. 

Before using for the first time, ask for a prac-

tical demonstration.

Before working on the machine 

itself, pull the mains plug.

Wear safety glasses and 

ear protectors when 

impact drilling. 

Wear light respiratory 

protection and a hard 

hat.

Be careful of hidden electrical lines 

or gas and water pipes. Check the 

working area, e.g., with a metal 

detector.

•

Before commencing work, the PRCD pro-

tective switch must be checked for proper 

functioning.

•

Before commencing work consult the 

responsible structural engineers, architects or 

site supervision about any planned borings, 

especially when cutting through reinforcing 

steel.

•

The machine may only be operated using 

a power supply with protection earthing 

according to the regulations.

•

The machine may not be operated by per-

sons under the age of 16 years.

•

The drill stand must always be mounted 

firmly and must not be able to move during 

drilling.

•

Only mount the drill stand on an even, firm 

and smooth surface using the vacuum pump

.

When carrying out 

“over” head wet cut 

core drilling, a 

water collecting 

ring and water suc-

tion are always to 

be used. These must be in perfect 

condition.

•

When drilling “over” head 

always

 secure the 

drill stand with the assembly.

•

Prevent the drilling core from falling.

Use only original B+BTec parts and acces-

sories.

FOR YOUR SAFETY

Please read and comply with these 

instructions prior to the initial ope-

ration of your device.

Retain these instruction manual for 

future reference or for subsequent 

possessors.

WARNING: Prior to the first start-

up, it is definitely necessary to read 

the Safety instructions!

In case you do not adhere to this instruction 

manual and the safety instructions, this may result 

in damages on the device and cause dangerous 

situations for the operator and other people. In 

case of transport damage inform vendor imme-

diately.