background image

 

 

RFM-RPT-3_868_BATT_QUG_v1.2  

 

RFM-RPT-3

 

 

 

 

                                                         

   

ENG 2

 

WMBUS 868 MHz repeater for B METERS radio modules 

 

Safety

 

 

During  the  installation  process,  handle  the  device  with  care,  don’t  crush,  don’t  bent,  don’t  exposure  to  electrostatic 
discharges  which  could  damage  permanently  the  device,  do  not  install  close  to  heat  sources  (radiators,  conditioners, 
convectors etc..).

 

 

The  RFM-RPT-3  repeater  doesn’t  contain  hazardous  materials  in  accordance  with  European  directives  91/157/EEC, 
93/86/EEC, and 2002/95/EC(RoHS). The device requires specific disposal on the end of its lifetime. Recycling is mandatory 
or  recommended  following  the  Directive  RAEE  2012/19/UE  inside  European  Union  region,  or  anyway  dispose  in 
accordance with local laws and regulations. Do not burn, or undergo to high temperatures. 

 

 

The  RFM-RPT-3  repeater  works  reliably  in  the  environmental  conditions  specified  in  this  manual.  Any  unauthorized 
intervention and/or modification may cause malfunctions or total damaging of the product. 

 

Warranty 

The warranty period is set at 24 (twenty-four) months from the date of the shipping of the material. Warranty is against defects 
in materials or workmanship when the product is properly used and maintained in normal efficiency. This Warranty is valid and 
enforceable in the country where the product was purchased. In the event that the product has been purchased in a  country of 
the European Union, the warranty is still valid in all countries of the Community. 
 
To obtain warranty service, it is requested to comply with the following clauses:  

1.

 

Products must be delivered for repair at the expense of the customer.  

2.

 

The  product  warranty  will  be  subject  to  the  exhibition  of  a  tax document  (receipt,  receipt  or  bill  of  sale),  which 
attests to the date of purchase of the product.  

3.

 

The repair will not affect the original date of expiration of the warranty and will not involve the renewal or extension 
thereof. . 

4.

 

If at the time of the repair, the product has not any defect, it will be charged the costs of the technical analysis. 

5.

 

The  warranty is void if the failure  was due to: impacts, falls, misuse or abuse of the product, use of non-original 
batteries, accidents, product alteration, replacement/detachment of seals and/or product tampering. The same also 
does not cover damage caused during transport if packages used are unsuitable.  

6.

 

The warranty is not covering the battery of the product. 

7.

 

The warranty does not cover the inability to use the product, other costs incidental or consequential damages or 
other expenses incurred by the purchaser. 

8.

 

The warranty doesn’t cover damage to the product caused by usage in any other way than described in this manual. 

 
 

Support on the products 

If the product needs to be sent to the technical assistance, contact your dealer or contact the BMETERS After sales service at 
support@bmeters.com. 
 
 

Declaration of Conformity 

Hereby, B METERS, declares that this RFM-RX2 is in compliance with the essential requirements and other relevant provisions of 
Directive 2014/53/EU. 
The complete declaration can be downloaded from the official websit

www.bmeters.com

 
 

Contact Info 

 

B METERS Srl 

 

Via Friuli 3 
Gonars (UD) – 33050  
Italy 

Tel: +39 0432931415 
Fax: +39 0432992661 
E-Mail (sales/informations)

info@bmeters.com

  

E-mail (technical support)

support@bmeters.com

 

Web

www.bmeters.com

 

 

Reviews: