background image

Introduction

PlasmaLoop  has been designed for contactless and convenient disposal 

of microorganisms (viruses, fungi, bacteria).  It  is  a  Tesla-Rife  generator 

of electromagnetic field, which was made for scientific educational and 

laboratory purposes. 

Unlike  the  original  Tesla  generator  of  electromagnetic  field  generated 

by  conversion  of  alternating  current  in  a  classical  spiral  coil,  PlasmaLoop 

combines two  principles  and  follows  the  work  of  R.R  Rife,  who  used  Hertz 

dipole  as  an  antenna  emitting  electromagnetic  spectrum  of  low  and 

medium  frequencies superimposed  on  noise  source  of  spectrum  generated 

by  plasma  discharge.  PlasmaLoop  is  new  and  original  in  the  way

,

  that

 

it 

combines the original Tesla generator with a Rife generator, where the plasma 

discharge  is  concentrated  in  a  single-thread  coil  -  tube,  significantly 

increasing  the  intensity  of  the  near  electromagnetic  field  in  the  H 

(magnetic  field)  component.  In  principle,  this  "antenna"  is  close  to  MLA 

(Magnetic  Loop  Antenna)  and  builds  on  several  years  of  development  and 

research  of  BTV  in  this  area,  which  is,  among  other  things. 

shown  by

  a 

number  of  industrial  protection  certificates  - national and EU.

It  is  not  recommended  to  use  PlasmaLoop  as  an  amateur  and  for  other 

than  study,  scientific  and  laboratory  purposes,  as  the  interaction  of  these 

types of electromagnetic fields with living tissue is not yet scientifically proven.

Summary of Contents for PlasmaLoop













Reviews: