I N S - R B - M A T R Y X - S L A S _ E N I n s t r u c t i o n G u i d e
P a g e
6 | 7
4.3. Tighten to specification
M5 X 20 Torx T25 SCREW
[P2].
TIGHTENING TORQUE
M5 Nylon Lock Nut [P3]
10 N•m ± 2 N•m
4.4. Drill holes in front of the tunnel using bumper as a template with drill bit 3/16" as shown.
