BT8390-VESA400MAF
HOOK THE REMAINING SCREENS ONTO RAILS
Starting from the bottom rail, hook the remaining screens onto rails using a plumb to align.
After mounting each screen use the Y & Z micro-adjustment knobs on the interface arms*
items D1 & D2
to level and align screens.
Note:
A 1mm gap between screens should be maintained.
ii.
iii.
iv.
v.
Adjustment knobs
are also compatible
with 6mm allen key
Adjustment lines to
help with accurate
Y & Z axis screen
alignment
Total Y axis
adjustment is +/-25mm
Total Z axis
adjustment is 20mm
Note:
Light pressure in
the desired direction of
travel will assist in the
adjustment of knobs when
using heavier screens
*Only available when using the
BT8390-VESA400MAF
interface arms. To level the rows of screens using the fixed or tilt
interface arms, use the height adjustment screws on top of the arms before mounting the next row of screens
- see page 15
Use
Height Adjustment*
(Y axis knobs)
to align bottom/top of screens
Use
Depth Adjustment*
(Z axis knobs) to align front of screens
Use
Lateral Adjustment
to align sides of screens
14
5.
Y
Z
X
Summary of Contents for SYSTEM X BT8340
Page 3: ......
