background image

mani

The name is also used for our 3 way reference speakers, but what does it actually mean? In Norse mythology Mani was the person who drove the chariot 

that carried the Moon across the sky. In relation to our products, it reflects looking to the sky as the limit while letting the product shine. These new 

amplifiers are as compact as we’ve ever done, but the performance follows the creedence of the Mani line up. Redefine, Refine & Redeem. 

Starting out with a 4ch and a matching mono, both of which are equally versatile, we are excited to present the Mani 600.4 and the Mani 650.

Where there’s sufficient amounts of power, performance & authority, spiced up with the keystones of B2 audio, The Mani amplifiers will provide you with 

numerous hours of joy and sweetness. 

 

 

 

            

4

                                           

  

5-6

 

speaker connections 

 

 

7

 

* Bridged connection 

 

8

      

input 

connection 

   

 

* RCA Connection   

 

9

 

* High Level connection              

10

troubleshooting   

 

             

11

Warranty info 

 

 

             

12

 

 

 

            

3

                                           

  

Summary of Contents for MANI Series













Reviews: