background image

Zero Five - The Falcon & Zero 8 - The Ospreay 

Reviving the Zero’s.

These amplifiers set multiple world records and have secured championships all over the world. This is a task with an immense responsibility.  In their 

time the Zero line was the benchmark to compare with. Not only in terms of performance, but even appearance. We decided to merge the DNA and 

heritage of the Zero series amplifiers, but to build with the technology of the future. Our previous amplifiers have been noted as world’s first and created 

a demand for how future amps should be equipped.  The Zero 5 (The Falcon) and the Zero 8 (The Osprey) follow in the footsteps of our previous models. 

These amplifiers are not meant to be the most powerful on the market. They are a statement of quality both in design and in the components used. 

Sourced from all over the world and not accepting anything other than the best they boast amazing power ratings but offer reliablity and a sense of 

pride in ownership rarely seen in this era. Unique features combined with proprietary designs will keep them ahead of the game, offering an advantage 

which will show the true value of the product.  

To obtain the full potential of any amplifier & to minimize failure, it is advised to upgrade your stock electrical system. Don’t take any shortcuts, a better 

electrical equals enhanced performance and stability.  

 

 

 

        

   4

strapped speaker wiring  

 

9

slave 2 control panel & wiring           10  

accu8 crossover & boost 

            11

troubleshooting   

 

            12

audio precision charts      

             13

warranty 

info 

   14

As one of the most iconic companies offering high output amplifiers, innovation has its price. They say imitation is as a kind of flattery, but it can easily 

become financially unwise going down the same route. B2 Audio is an innovator, and we set more trends instead of just following them. We have decided 

that it is time to start anew. Our team has reviewed each of our designs, noting what works, what doesn’t, and what we could upgrade. 

From each component used to the thickness of PCB, we left no rock unturned so to speak. The result is an entirely new amplifier line, designed in the USA 

with the help of the Danish DNA we offer in all of B2 audio’s products. B2 Audio is proud to present the new Zero amplifiers:  

Zero Five - The Falcon & Zero 8 - The Osprey

 power terminal                                        5-6

 installation & preparation 

 

 7

 

 speaker connection                                  8

 strapped control panel setting        9

 

  

Summary of Contents for Zero Five The Falcon















Reviews: