14
Manual: MaxBright
®
II Binoviewer
Assembly with Zeiss Microbayonet
With glasspath correctors 1,25x
# 2456314Z,
1,7x
# 2456316Z
or 2,6x
# 2456317
For this, you need the optional TQC Heavy Duty T-2 Quick Changer
# 2456313A .
To use the included dovetail ring, you need to remove the T-2 counter nut first. Use
the included tool
4
for this. Set it into the two holes inside of the nut to unscrew the
T-2-adapter from the MaxBright
®
II Binoviewer (as shown below). Then you can easily
screw the dovetail ring onto the M34-thread of the binoviewer.
The two 1,25x and 1,7x glasspath correctors are moun-
ted into the dovetail at the binoviewer
The 2.6x glasspath corrector is inserted into the T-2 star
diagonals as shown here.
2,6x GC
1,25x + 1,7x GC
Remove the inner ring with
the included tool
The M34-thread without the
adapters
Screw the Zeiss-dovetail ring
onto the M34-thread
Option 1: Assembly with a T-2 Star Diagonal
1. Remove the dust caps from the TQC Quickchanger.
3. a) GC 1,25x and 1,7x:
Screw the GC into the chrome dovetail ring at the front end
of the binoviewer (image below, to the right).
b) GC 2,6x:
Screw the GC into the T-2 star diagonal. (image below, to the left)
4. Screw the TQC Quickchanger onto the T-2 star diagonal (or onto the T-2 nose-
piece, if you don't use a star diagonal.
