background image

24

Manual: MaxBright

®

 II Binoviewer

Never spray the cleaning fluid directly 

onto the glass surfaces! The fluid might 
soak into the housing and distribute 
dirt in such a way that the binoviewer 
becomes useless. Always apply the fluid 
only to the cloth and never to the lenses!

IMPORTANT WARNING!

 

Do NOT try to disassemble the bino-
viewer and do NOT try to clean it inside! 

Baader Optical Wonder Cleaning Fluid and Micro Fibre 

Cloath are also available as set.

Item-Nr.: 

# 2905009

www.

baader-planetarium

.com

BAADER PLANETARIUM

Zur Sternwarte 4 • D-82291 Mammendorf • Tel. +49 (0) 8145 / 8089-0 • Fax +49 (0) 8145 / 8089-105

www.baader-planetarium.com  • kontakt@baader-planetarium.de • www.celestron.de

G

M

B

H

© 2020 Baader Planetarium. All Rights reserved. Products or instructions may change without notice or obligation. 
Images and illustrations may differ from the original products. We reserve the right of errors. Reproduction of this 
instruction manual, complete or in parts, only with written permission by

Problems, Maintenance and Warranty

If you should happen to notice problems or defects inside your binoviewer, NEVER try 
to open it yourself and do not request service from personnel not authorised by Baad-
er Planetarium. Doing so will void the warranty. If you have any problems or questions 
about the use of the binoviewer or its optional accessories, please contact Baader 
Planetarium or your local distributor. 

Summary of Contents for MAXBRIGHT II

























Reviews: