background image

© 2023 Baader Planetarium GmbH

19

Recommended Accessories

We recommend the following accessories to expand the scope of delivery:
• 

Baader Standard Base for all Vixen-style finderscope mount bases

 

# 2457000

• 

Baader Multi-Purpose Vario Finder 10x60 with MQR IV finder holder

 

# 2957465 

plus 

65 mm AstroSolar Spotting Scope Filter (ASSF)

 

# 2459336

 

This combination already includes a standard base for mounting the finder on the 
telescope and serves with the ASSF solar filter as a solar finder. With a T-2 Extensi-
on Tube 40 mm 

# 1508153

, a camera can also be attached, either for guiding or ob-

serving the sun in white light. With the Baader FlipMirror II star diagonal 

# 2458055

it is possible to switch between an eyepiece and a camera.

• 

2"-Eyepiece Clamp

 for 2"-accessories:

•  For TriBand 8

"

, 9¼

"

 and 11

"

: 2" ClickLock SC / HD (2") Clamp 

# 2956220

•  Alternatively only for TriBand 11

"

: 2" ClickLock SCL (3.3") Clamp 

# 295623

• 

Dovetail bars for Mount or Accessories

 (Custom lengths on request)

•  3" Dovetail Bar, 470 mm for Celestron 

# 1501615

•  3" Dovetail Bar, 530 mm for Celestron 

# 1501620 

These dovetail bars are compatible with the 3" Losmandy standard and can also 
be installed on top of the telescope to attach additional accessories

•  V-Dovetail Bar, 345 mm for 8" SC/HD 

# 2451734

 – short dovetail bar to use the 

TriBand C8 on Vixen-stlye mounts 

•  V-Dovetail Bar, 470 mm for SC 

# 2451101

 – extra long dovetail bar to use the 

TriBand C8 on Vixen-style mounts, and to better balance them. Please note 
that this bar can only be installed on the upper side of the TriBand C8 – this is 
nor problem for using the telescope, but then it is upside down, and installing a 
finder is not practical. 

• 

Leveling Counterweights 

to balance the telescope, are 

mounted on the dovetail bar:

•  1 kg leveling counterweight and 3" riderclamp 

# 2451576 

•  1 kg leveling counterweight and V-dovetail clamp, 

# 2451531

• 

Celestron Focus Motor

 

# 821160

• 

Solar Shade 

with drilled hole T-2 

# 2959279

• 

Dew Shield

 (only for observations at night, without the 

heat shields)
•  Celestron Dew Shield DX for C6 & C8 

# 821128

•  Celestron Dew Shield DX for C9¼ & C11 

# 821129

1

2

4

3

The screws for attaching further 

accesories

Summary of Contents for TRIBAND-SCT

























Reviews: