IS-033
___________________________________________________________________________
_______________________________________________________________________________________
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, Iceland Tel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
16
Page 16
Cleaning
Clean the complete machine at regular intervals (8 operating hours).
When using low-pressure cleaning devices, do not direct the jet into bearings.
Rest periods
Set the main switch unto position
0
.
Remove product remainders and wash the machine from all sides with a powerful water jet.
Pre cleaning
Start and clean the machine observing the appropriate safety distance from the moving
machine parts:
with low pressure, max 30 bar.
with 60°C drinking water.
from bottom to top.
Keep the safety distance.
Make sure that clothing, hoses, cleaning devices do not get caught by
the moving components of the machine; danger of serious bodily
injuries and damage to the machine.
Do not run the machine unattended
.
After pre cleaning, stop the machine, set the main switch to position
0
and secure it.
