IS-033
___________________________________________________________________________
_______________________________________________________________________________________
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, Iceland Tel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
20
Page 20
Adjustment of the cycle control proximity switch
Prior to working on the machine switch the main electrical switch to the
0
position and lock it. Failure to comply may result in serious personal injury or
death.
It is important to verify that the proximity switch is correctly located in the holder (fig.4 item 2)
prior to adjustment.
Loosen the gland nut (fig.4 item 3).
Push the cable sheath towards the
holder, whilst maintaining pressure
re-tighten the gland nut.
Loosen the 2 hexagon nuts
(fig.4 item 1).
Rotate the machine manually as
described on page 13, so that the
switch-fane is at its closest position to
the proximity switch holder (fig.4 item 2).
Adjust the distance between the switch-
fane and the proximity switch (fig.4 item
2) to 1mm.
Re-tighten the 2 hexagon nuts (fig.4 item 1).
1
2
Fig 4
3