IS-033
___________________________________________________________________________
_______________________________________________________________________________________
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, Iceland Tel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
21
Page 21
Adjustment of the locking arm stop
Prior to working on the machine switch the main electrical switch to the
0
position and lock it. Failure to comply may result in serious personal injury or
death.
Loosen the hexagon locknut
(fig.5 item 2).
The machine can be manually rotated
as described on page 13, to aid the
setting of the locking arm.
The rest position of the locking arm
should be 8mm below the level of the
cam.
Adjust the rest position by turning the
hexagon head bolt (fig.5 item 1).
Re-tighten the hexagon locknut (fig.5
item 2).
Fig 5
1
8 mm
3
2
