IS-033
___________________________________________________________________________
_______________________________________________________________________________________
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, Iceland Tel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
31
Page 31
Adjustment of the in-feed plate
Prior to working on the machine switch the main electrical switch to the
0
position and lock it. Failure to comply may result in serious personal injury or
death.
Manually rotate the machine as
described on page 13, to move the
transport fork to the in-feed plate.
To adjust the in-feed plate (fig.18 item
2), slacken the 3 hexagon bolts (fig.19
item 1, 2 and 3).
The in-feed plate (fig.18 item 2) should
be adjusted as close to the transport fork
(fig.18 item 1) as possible.
It is important that the in-feed
plate and the transport fork do
not touch during the complete
cycle.
Re-tighten the 3 hexagon bolts
(fig.19 item 1, 2 and 3)
Fig 18
1
2
Fig 19
1
2
3
