IS-033
___________________________________________________________________________
_______________________________________________________________________________________
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, Iceland Tel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
35
Page 35
Fig 23
1
3
2
Adjustment of back-plate travel position
Prior to working on the machine switch the main electrical switch to the
0
position and lock it. Failure to comply may result in serious personal injury or
death.
Manually rotate the machine, as
described on page 13, until the back
plate is approximately in the middle of its
travel.
Loosen do not remove the hexagon
head bolt (fig.23 item 1).
Adjust the back plate (fig.24, item 2)
position by turning the excentric bushing
(fig.23 item 2) for the back-plate cam
roller (fig. 23 item, 3).
The clearance of the back plate to the
transport should be approximately
10mm (3/8") (fig.24).
Re-tighten the hexagon head bolt
(fig.23 item 1)
Fig 24
1
2
