IS-033
___________________________________________________________________________
_______________________________________________________________________________________
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, Iceland Tel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
42
Page 42
Lubricant change of the gear motors
Prior to working on the machine switch the main electrical switch to the
0
position and lock it. Failure to comply may result in serious personal injury or
death.
Unscrew the drain and vent plugs.
After draining the oil, flush the gear box thoroughly using suitable flushing oil.
Prior to filling the gear motor with new oil, make sure that all flushing oil residue is
removed. Replace the drain plug.
Checking the oil level: With the gear at rest, the oil must extend to the lower rim of the
threaded bore when the oil level screw is removed.
Refit the vent plug.
The roller bearings should to be cleaned and greased during the same period. Make
sure that only one third of the roller bearing space is filled with grease to prevent
premature failure.
Lubrication change every 2000 hrs or 1 year.
