Programming
DUO DMX
Gateway
26 b.a.b-technologie gmbh
DUO DMX
Gateway
5.2.15
DEVICE MANAGER
In order to assemble the individual DMX channels into devices, it is necessary to define in the device
management which channels belong to a device. The device management is accessed via the menu
option
Settings
→
Device management
.
Figure 28: Device Manager
In the left-hand side of the window all DMX channels are listed (addresses 1 - 512). If a channel is
marked, it can be assigned a name and specific colour using the input mask on the right. In order to
define RGB and RGBW devices, proceed as follows:
RGB device:
Mark the first channel of the required DMX device (e.g. channel 1 “Ch1”).
Under “Name” in the right-hand configuration window, enter the required name of your DMX
device (e.g. “RGB lights 1”).
Now right-click on the channel and select “Add RGB channels”. The device management
automatically adds the RGB channels.
An RGB device is now defined. It is given the name that you assigned in the first channel.
RGBW device:
Same as above, except that “Add RGBW channels” must be selected.
