DUO DMX APP
DUO
DMX
GATEWAY
66 BAB TECHNOLOGIE GmbH
DUO
DMX
GATEWAY
6.3.4
CONTROLLING THE LAMPS AND SCENES
After having assigned the DMX outputs (see previous chapter), the lamps and scenes can be accessed
directly (Figure 60: DUO DMX APP Start page see orange arrows).
To be found under the inputs (Figure 60: DUO DMX APP Start page)
Control of lamps and
Control of scenes
The figures on this page show the available lamps (figure to the right) and scenes (figure to the left) of a
project example.
The scenes are started by clicking on them. The figure on the right side shows which scenes have been
started. (grey line = not active; orange line = active; see orange arrow)
NOTE: If the DMX output must be changed, the selection can be opened again by a long click on the
lamp.
Figure 66: Control of lamps
Figure 65: Control of scenes
