Step 2:
Attaching the baby seat or toddler seat
1. Insert the bolt through the bottom plate and then into
the hole in the bottom bench.
(photo A)
2. Thread both ends of the belt through the bottom hole
in the toddler seat to approximately 7 cm from the end.
(photo B)
3. Turn the toddler seat around and thread both belt ends
along the back through both plates. Baby seat:
the plates have a wide and a narrow opening,
the narrow opening should be at the bottom.
(photo C)
4. Thread the belts from the back of the seat to the front
through the openings in the toddler seat. Choose either
the high or low opening, depending on the size of the
child.
(photo D)
5. Thread the belts first through the three-bar slides and
then through the easy-lock inserts.
(photo E)
6. Adjust the belts to equal height by drawing the belts
through the three-bar slides.
(photo F)
The belts will
later be adjusted to the exact length.
The toddler seat is
now ready to be mounted onto the bench. (
photo G)
A.
B.
C.
D.
E.
8
