start
powder
setting
oz
1
2
1
Carefully pour formula powder into the
powder container. Make sure the powder
is filled between the MIN & MAX lines
printed on the powder container.
Place the lid on the powder container and
turn clockwise until it stops.
This will engage the safety switch & lock
the powder container onto the base.
To remove the powder container, turn the
lid counter-clockwise.
Place the drip tray so that your bottle is
as close to the funnel as possible to avoid
spills.
Preparing your first bottle
Drip Tray Set-up
Powder setting
button: Press to
select setting number
for your formula
brand and type.
LCD Display:
Shows selected
functions &
warnings
Ounce button:
Press to select ounces
of water dispensed.
(Press & hold the button for
5 seconds to change to ml).
Power button:
Press to turn
machine on or off.
Press to stop
dispensing.
Start button: Press to start
dispensing formula
Formula Pro® Mini - controls & operation
Powder Lid Open - The powder container lid is not closed completely or is not on the powder container
correctly. Close the powder container lid completely and correctly when this symbol is illuminated.
Low Water - Refill water tank when this symbol is illuminated.
Clean Funnel - This symbol will illuminate after every 4 bottles are made. When this symbol is illuminated,
remove funnel assembly, wash, and dry completely, then place it back into the base. See Page 11 for details.
Funnel Out - Funnel is removed or not inserted completely. Make sure the funnel is pushed all the way in
when this symbol is illuminated.
Warning symbols
Powder & water settings
Water Temperature
Powder Setting Indicator - Use the “powder setting” button to choose your powder setting 1-10.
Ounce Indicator - Use the “ounce” button to choose how many ounces of water to mix with powder.
2, 3, 4, 5, 6, 7, 8, 9, 10 ounces of water are available. There is no option to make a 1oz bottle.
The Formula Pro® Mini will not run if any of these symbols are illuminated on the LCD display.
Now let’s review the controls on the next page.
The drip tray can be used in 2 positions to
make sure your bottle fits under the funnel.
The temperature icon will flash when heating & will stay solid when the water reaches body temperature.
8
7
