Instructions
Mixing Formula
1
Add water
Use the markings on the
side of the pitcher to
measure your desired
amount.
2
Add Formula Powder
Always follow formula
manufacturer’s powder
to water mixing ratio.
3
Tip: for powders that float
If your formula powder floats on
top of the water, use the wand
to push it down for better mixing.
Tip for mixing smaller amounts of formula:
Press the power button lightly & repeatedly to pulse mix.
This is especially helpful to minimize bubbles when the level
of formula is less than 16oz/410ml in the pitcher.
3
4
Place Lid on Pitcher
press the Power Button
Push once to turn on, allow to
mix for 1 minute, then press
again to turn off.*
Pour mixed formula
into bottles & store
them in the
refrigerator
ALWAYS
follow the formula manufacturer’s instructions for mixing formula and water.
ALWAYS
use boiled, cooled water or bottled water suitable for infant formula preparation.
©2018 Baby Brezza Enterprises LLC - 1 East 33rd Street, New York, NY 10016
*Some formula powders, especially hypoallergenic varieties that are inherently difficult to mix, may clump.
Warm water may help dissolve these powders. Make sure prongs on wand are completely submerged
for best mixing.
