Baby Jogger city bistro, Assembly Instructions Manual

9

ADJUSTING HEIGHT

 WARNING

   DO NOT adjust the height of the 

product with the child in it.

19     To adjust height, squeeze buttons on 

the outside of both legs and lower 

or raise seat. There are 4 height 

positions.

HARNESS COVERS

20  Slide harness covers onto harness 

straps.

TO FOLD HIGHCHAIR

21   Press in and squeeze handle on 

bottom of the tray and remove from 

highchair.

22   Rotate calf support up into storage 

position.

23   Squeeze button on back of seat back 

and rotate highchair seat closed. 

NOTE: 

To ensure smooth folding, 

buttons must be fully squeezed 

before rotating.

24  Squeeze handle and rotate up.

25  Be sure highchair is locked closed.

TO STORE TRAY

26   Slide tray onto mounts on back legs 

of highchair.

27  Tray stored.

TO REMOVE SEAT PAD

28  Unfasten snaps on seat pad from 

mounts on seat back.

29   Disconnect plastic hooks from 

bottom of seat back.

30   Insert seat pad webbing through 

slots in calf support.

31  Pull webbing out of calf support.

32   Press button on buckle to release 

straps if connected.

33   Insert shoulder harness straps 

through slots in seat back.

34   Pull softgoods shoulder harness 

straps out of seat pad.

35   Insert waist harness through seat 

pad.

36  Insert crotch strap through seat pad.

37   Re-attach shoulder harness straps 

through slots in seat back.

TO OPEN HIGHCHAIR

1   Squeeze leg release handle.

2   Rotate handle down until highchair  

locks open.

3  Grasp highchair seat back.

4   Pull seat back up until it locks into  

open. CHECK that seat is locked by 

pushing on the seat back.

5   Lower calf support down to use 

position.

6     Fasten snaps on seat pad to mounts 

on seat back.

7   Ensure plastic hooks is attached 

around bottom of seat back.

ATTACHING TRAY

8   Press in and squeeze handle on 

bottom and attach tray to highchair 

arms. CHECK the tray is properly 

installed by pulling on the tray.

9  Tray can also be attached as shown.

TRAY INSERT

Dishwasher safe.

10   Attach tray insert by pushing it down 

on the tray.

11   To remove pull up on the back of the 

tray.

USING SAFETY HARNESS

 WARNING

Falling hazard: Always use the  

  restraint system.

12   To open, press button on buckle to 

release the waist straps and slide 

shoulder strap off of waist straps.

13   To close, slide shoulder strap 

connectors to waist straps and insert 

into buckle.

14   Use slide adjuster on shoulder, 

waist and crotch straps for tighter 

adjustment.

ADJUSTING SAFETY HARNESS

15   Line up ends of shoulder straps from 

seat back.

16  Pull out front of seat pad.

17   Insert shoulder straps through 

matching seat pad slot.

18   Insert into matching slots in seat 

back and secure in seat back.

EN