33
1
Place carrier on an approved vehicle seat
location
.
1 Place the car seat rear-facing on the
vehicle seat
.
Route the lap portion of the
lap/shoulder belt through the lap belt
guides on both sides of carrier
.
Make sure
the belt lies flat and is not twisted
.
Fasten
the buckle
.
2 Check the red line level on the side of the
shell to make sure it is level to the ground
.
3 Route the shoulder portion of the belt
around the rear of the seat and under the
shoulder belt guide
.
If vehicle belt latch
plate does not lock, then retractor must
be switched
.
SEAT INSTALLATION - LAP/SHOULDER BELT ONLY
2
3
Summary of Contents for CITY GO PD348959F
Page 47: ...47 Notes...
Page 95: ...47 Notas...