![background image](http://html1.mh-extra.com/html/baby-jogger/city-go/city-go_instructions-manual_3197610016.webp)
16
Before installing base, make sure vehicle is
on level ground
.
Place base on an approved vehicle seat
location
.
1 Open the lock off
.
2 Ensure the vehicle seat belt is not twisted
and route the vehicle belt through the
first belt path opening then under the
belt lock-off and down through the
second belt guide
.
3 Check the level indicator on the base
.
The bubble must be completely within
the zone of your childs weight
.
For infants
weighing 4-20 lb (2-9 kg) the bubble
must rest within the light blue line
.
For
children weighing 20-35 lb (9-16 kg) the
bubble must rest within the dark blue
line
.
Adjust the recline foot if needed
.
BASE INSTALLATION - LAP/SHOULDER BELT
2
1
3
4-20 lb (2-9 kg)
20-35 lb (9-16 kg)
Summary of Contents for city GO
