22
INSTALL REAR-FACING WITH VEHICLE SEAT BELT
2
INSTALL REAR-FACING WITH VEHICLE SEAT BELT
Make sure the cup holder is installed before installing the seat in
your car. See the “Features” section on page 20 to install the cup
holder.
1. Store the tether strap by attaching the tether hook to the slot
on the back on the car seat.
2. Store the lower anchor connectors inside the lower anchor
storage compartment.
3. Rotate the recline foot on the bottom of the car seat into the
rear-facing position marked with a blue label. The recline foot is
secure when it “clicks” into place.
1
3