37
INSTALL FORWARD-FACING WITH VEHICLE SEAT BELT WITH TETHER
10
8. Open the RAPIDLOCK lock-off by pushing the gray button and
lifting the lock-off arm.
Review your vehicle’s owner manual for vehicle seat belt use.
9. Thread vehicle seat belt through the orange forward-facing
belt path, through the RAPIDLOCK lock-off, and out the other
side. Buckle the seat belt. The seat belt should lay as flat as
possible and not be twisted.
10. Remove vehicle seat belt slack. Press down firmly in the
center of the car seat. Pull on the shoulder belt to tighten while
feeding the slack back in the retractor.
Do not pull on the belt with excessive force.
If the belt is too
tight, you will not be able to close the RAPIDLOCK.
Do
NOT lock the vehicle seat belt. The RAPIDLOCK locks the
seat belt.
8
9