38
INSTALL FORWARD-FACING WITH VEHICLE SEAT BELT WITH TETHER
11
11. When the slack is removed, close the RAPIDLOCK lock-off
until you hear a “Click”. Make sure the vehicle seat belt is under
the RAPIDLOCK Lock-Off.
12. Attach tether strap. Extend the tether by lifting up on the
tether lock and attach to vehicle tether anchor. Consult
vehicle’s owner manual for specific location.
The tether strap should not be twisted. If twisted, you will not
be able to tighten the strap.
13. Tighten tether strap. Remove all the slack.
14. Test for tightness. Grab the sides of the seat where the vehicle
seat belt is and slide the car seat side to side and front to back.
If the seat moves less than 1” (2
.
5 cm), it is tight enough.
12
13
CLICK
14
Keep hands away from the RAPIDLOCK lock-off
area when closing the RAPIDLOCK lock-off.