58
VEHICLE INFORMATION
LAP BELT INSTALLATION
Always review your vehicle owner’s manual for specific information about your vehicle seat
belts.
Locking Latch Plate and No Retractor
When installing the car seat, route the lap seat belt through the proper path and buckle it
in. Then, pull upwards on the tail of the belt so that the lap belt gets tight around the car
seat.
Grab the sides of the seat at the belt path and slide the seat side to side and front to back.
The seat should not move more than 1” (2
.
5 cm).
Sewn On Latch Plate and ALR Retractor
Slowly pull the lap belt all the way out.
Route the vehicle seat lap belt through the proper
belt path and buckle it in. Then, pull the lap belt tight while feeding all the slack back into
the retractor.
Grab the sides of the seat at the belt path and slide the seat side to side and front to back.
The seat should not move more than 1” (2
.
5 cm).