13
1
Preparing for Upper and Lower Threading
Winding the bobbin
Wind the thread onto the bobbin.
a
Turn on the sewing machine.
b
Place the bobbin on the bobbin winder shaft
so that the spring on the shaft fits into the
notch in the bobbin.
a
Notch
b
Bobbin winder shaft spring
c
Slide the bobbin winder shaft to the right until
it snaps into place.
d
Swing up the spool pin, and then remove the
spool cap.
a
Spool pin
b
Spool cap
e
Fully insert the spool of thread for the bobbin
onto the spool pin.
Slide the spool onto the pin so that the spool is
horizontal and the thread unwinds to the front
at the bottom.
●
The included bobbin was designed specifically for this sewing machine. The machine will not operate
correctly if older model bobbins, which have a different thickness, are used. Use only the enclosed
bobbin or bobbins of the same type. Using a bobbin other than the one designed specifically for this
machine may result in injuries or damage to the machine.
a
Hook of the
bobbin-winding
thread guide
b
Pretention disk
c
Bobbin winder
shaft
d
Bobbin
CAUTION
a
b
c
a
This model
b
Other model
c
11.5 mm (7/16 inch)
(actual size)
a
b
●
If the spool is not positioned so that the thread
unwinds correctly, the thread may become
tangled around the spool pin.
a
b
CAUTION
