GETTING READY
———————————————————————————————————————————————————————————————————————————————————————————————————————
22
p
Raise the presser foot lever, pass the end of
the thread through the presser foot, and then
pull out about 5 cm (2 inches) of thread
toward the rear of the machine.
a
5 cm (2 inches)
X
The upper threading is finished.
■
Manually threading the needle
If the needle threader cannot be used, thread the
needle as described below.
a
Thread the machine to the needle bar thread
guide, as described in steps
a
through
k
of
“Threading the upper thread”, and then lower
the presser foot lever.
b
Turn off the sewing machine.
c
Manually pass the thread through the eye of
the needle from front to back.
d
Raise the presser foot lever.
a
Presser foot lever
e
Pass the end of the thread through the presser
foot, and then pull out about 5 cm (2 inches)
of thread toward the rear of the machine.
a
5 cm (2 inches)
●
Be sure to turn off the sewing machine,
otherwise injuries may occur if the start/stop
button is accidentally pressed and the
machine starts sewing.
a
CAUTION
a
a
