2
4
Always
keep your work area clear:
• Never operate the machine with any air openings blocked. Keep ventilation openings of the
sewing machine and foot control free from the build up of lint, dust, and loose cloth.
•
Do not
store objects on the foot controller.
•
Do not
use extension cords. Plug the machine directly into the electrical outlet.
•
Never
drop or insert
any
object into
any
opening.
•
Do not
operate where aerosol (spray) products are being used or where oxygen is being
administered.
•
Do not
use the machine near a heat source, such as a stove or iron; otherwise, the machine,
power cord or garment being sewn may ignite, resulting in fire or an electric shock.
•
Do not
place this sewing machine on an unstable surface, such as an unsteady or slanted table,
otherwise the sewing machine may fall, resulting in injuries.
5
Special care is required when sewing:
•
Always
pay close attention to the needle. Do not use bent or damaged needles.
• Keep fingers away from
all
moving parts. Special care is required around the machine needle.
• Switch the sewing machine to the symbol “O” position to turn it off when making any adjustments
in the needle area.
•
Do not
use a damaged or incorrect needle plate, as it could cause the needle to break.
•
Do not
push or pull the fabric when sewing, and follow careful instruction when freehand stitching
so that you do not deflect the needle and cause it to break.
6
This machine is
not
a toy:
• Your close attention is necessary when the machine is used by or near children.
• The plastic bag that this sewing machine was supplied in should be kept out of the reach of
children or disposed of. Never allow children to play with the bag due to the danger of
suffocation.
•
Do not
use outdoors.
7
For a longer service life:
• When storing this machine, avoid direct sunlight and high humidity locations. Do not use or store
the machine near a space heater, iron, halogen lamp, or other hot objects.
• Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders
can damage the case and machine, and should never be used.
• Always consult the operation manual when replacing or installing any assemblies, the presser feet,
needle, or other parts to assure correct installation.
