APPENDIX
————————————————————————————————————————————————————————————————————————————————————————————————————————————
94
The thread does
not pass through
the eye of the
needle.
The needle was not raised.
Press
(needle position button)
once or twice to raise the needle.
page 19
The needle is incorrectly installed.
Correctly install the needle.
page 27
The stitch is not
sewn correctly.
The appropriate presser foot for the
type of stitch that you wish to sew is
not used.
Attach the presser foot that is
appropriate for the type of stitch that
you wish to sew.
page 85
The thread tension is incorrectly set.
Adjust the thread tension.
page 45
The thread is tangled, for example, in
the bobbin case.
Remove the tangled thread. If the
thread is tangled in the bobbin case,
clean the race.
page 89
The fabric does
not feed.
The feed dogs are lowered.
Slide the feed dog position switch to
.
page 71
The stitch is too short.
Lengthen the stitch length.
page 38
The combination of fabric, thread and
needle is incorrect.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 26
The thread is tangled, for example, in
the bobbin case.
Remove the tangled thread. If the
thread is tangled in the bobbin case,
clean the race.
page 89
The sewing lamp
does not come
on.
The sewing lamp is damaged.
Contact your retailer or the nearest
authorized service center.
–
Symptom
Probable Cause
Remedy
Reference
