22
TURNING CORNERS
outside curves
The machine can continue sewing when rounding a
curve. There is no need to stop the machine and pivot.
Push excess fabric toward the presser foot giving the
machine more fabric and continue sewing as if sewing
a straight seam.
outside corner
1. Cut the corner about 5-6
cm (2-3 inches) along the
cutting line.
2. Sew to the end of fabric
and stop machine.
3. Raise needle and presser
foot.
4. Pull fabric slightly towards
the back and pull out
tangled thread from
Needle plate.
5. Turn fabric and position
the fabric by lining up the
cut line and blade.
Lower the Presser Foot.
6. Resume sewing.
inside corners
1. Snip to corner of seam
line.
2. Sew desired seam line
until blade reaches
corner.
3. When you approach the
corner, slow down.
Lower the needle.
3. Straighten the seam line
out in front of the blade.
Continue stitching to
complete the edge.
Summary of Contents for A-LINE Lauren BL450A
Page 1: ......
Page 28: ...62180 BL450A B8...
