2
Setting the Stitch
57
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Setting the Stitch
This machine is preset with the default settings for the stitch width and stitch length for each stitch. However,
you can change any of the settings by pressing
in the screen, then follow the procedure described in this
section.
Note
z
Settings for some stitches cannot be changed. For details, refer to "Stitch Setting Chart" (page 70).
z
Stitch settings return to their defaults if they are changed, when the machine is turned off or a different
stitch is selected before the stitch setting is saved. If you want to save settings, refer to "Saving stitch
settings" (page 64).
Adjusting the stitch width
The stitch width (zigzag width) can be adjusted to
make the stitch wider or narrower.
Each press of
makes the zigzag stitch narrower.
Each press of
makes the zigzag stitch wider.
Memo
z
means the setting cannot be adjusted.
z
If the straight stitch (left needle position or triple
stretch stitch) was selected, changing the stitch
width changes the needle position. Increasing
the width
moves the needle to the right;
reducing the width
moves the needle to the
left. For details, refer to "Changing the needle
position" (page 79).
z
Press
to return the setting to its default.
z
If the foot controller is connected, the
sewing speed controller can be used to
adjust the zigzag width. For details, refer to
"Adjusting stitch width using the sewing
speed controller" (page 58).
CAUTION
z
After adjusting the stitch width, slowly
turn the handwheel toward you
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the
needle may bend or break.
0711-0120-C-combo_E.book Page 57 Tuesday, August 26, 2008 2:43 PM
Summary of Contents for A-LINES Sofia BL137A
