For other exciting projects like this one, visit www.totallystitchin.net and www.babylock.com
LBIN-BL23A
Maria’s Pillow Continued
2
2
1
Fig. 2
A
B
C
* Lowering the Feed Dogs:
(A) Open the bobbin cover.
(B) To drop the feed dog, pull down the drop
lever and move it to the right, as illustrated.
(C) To raise the feed dog, pull down the drop
lever and move it to the left, as illustrated.
10. Adjust the stitch width and turn the handwheel to check if the needle enters into each hole in the button.
Lower the foot to hold the button in place. The holes in the button should align with the slot of the foot.
11. Stitch several times, repeat for remaining holes on a four-hole button.
12. Repeat this process until all six buttons are secure. Remember to raise the feed dog after sewing.
13. Pin the front to back piece with the right sides together. Using a straight stitch, stitch around the outer edge
leaving an opening for stuffing.
14. Clip excess bulk and seam allowances from the corners.
15. Turn right side out. Stuff firmly.
16. Using a hand sewing needle and thread, stitch the opening closed.
9. To sew the buttons by machine, attach the button sewing foot
(Figure 1), place the pattern selector on C, and lower the feed dogs*
(Figure 2) on the machine.
Fig. 1
