9
1. Check the presser foot (All Purpose Presser Foot).
2. Place the fabric under the presser foot.
3. Lower the presser foot.
4. Hold both threads to the back when starting to sew. Let threads go after sewing a few stitches.
5. While sewing regulate the speed with slide speed control lever if using the START/STOP
button or foot control when attached.
6. Stop machine when you reach end of seam.
7. Raise the presser foot lifter.
8. When you have reached the end of a seam, stop
sewing and turn the handwheel toward you to
bring the needle to highest position. Raise the
presser foot and pull the fabric out from under
the foot to the back of the machine. Cut the
threads with the thread cutter on the left side of
the machine.
The machine will be set at 01 automatically to sew straight stitches when power switch is
turned on.
Starting to Sew
Summary of Contents for Amelia BL100A
Page 10: ...8 Selecting the Stitch...
Page 15: ...13...
