Copyright
2004-2013 Baby Lock USA
Customer Support: 1-800-313-4110
BMP9 Ver. 4.21 Software Update
– p.3
Baby Lock Embroidery Professional PLUS (Model BMP9)
Update History
Version 4.20 update provided the following changes
1.
Fixed the situation where the embroidery pattern was not rotated 180 degrees if the
embroidery frame was changed from a cap frame to a different type of frame or from a
different type of frame to a cap frame when the machine finished sewing the pattern using
the Link function.
Version 4.01 update provided the following changes
1.
Fixed the situation where the machine may not cut short jump stitches when "thread
trimming" setting is "ON" in the Settings screen.
Note:
To cut short jump stitches, use embroidery data created with Palette 9
(.pes file version is 9.0 or later).
Version 4.00 update provided the following changes
1.
The pause marks are displayed where the machine will stop for the appliqué patterns at the
thread color sequence display.
2.
Improved so that the appliqué patterns with "APPLIQUE MATERIAL", "APPLIQUE
POSITION" or "APPLIQUE" are assigned to the same needle bar.
3.
Changed so that the range of "Appliqué Distance" is between 0.0 mm and 10.0 mm
(between 0" and 0.4") in the Settings screen.
Version 3.10 update provided the following changes
1.
Improved the performance for displaying the image on the LCD.
Improves response time when touching keys on screen.
2.
Reduced the time for tracing corners of pattern when checking the embroidery area.
3.
Added the three keys for switching the frame movement speed to move the embroidery
position.
4.
The embroidery time indicator on the LCD updates every minute.
