Pg. 13
Step 7: Carriage to Frame Assembly
Parts Needed:
1- Bottom Carriage/ Motor Plate Assembly
Fig. 7-A
Fig. 7-B
Fig. 7-C
Note:
For the following steps refer to Fig. 7-C for
direction of belt teeth when installing.
7-1 .
Stand your bottom carriage on its side with
the long belt sitting on the table.
7-2 .
Feed the end of your belt into the gearbox in
the carriage , as shown in Fig. 7-A.
7-3 .
Push the belt back down and keep feeding
the it through until you can see it come out just
below where it entered, as shown in Fig. 7-B.
7-4 .
Pull about half of the belt through the slot,
and gently set your carriage down onto the frame,
making sure the wheels line up on the track.
Top
Plate
Belt
Bottom
Plate
Belt
Notice the
direction
of belt teeth
