Pg. 30
Step 6: Mounting Clamp to Frame Assembly
Parts Needed:
1- Belt Clamp Assembly
1- Belt Tensioner Housing Assembly
6-1
. Slide the Belt Clamp Assembly (assembled
in Step 3) over the Left or Right Frame Side,
toward the front track support. Finger tighten the
M6 x 25mm Socket Button Head Cap Screw. You
will adjust this later, after your carriage is on the
frame. (See Fig. 6-A and 6-B).
6-2 .
Slide the Belt Tension Clamp with the Belt
Tension Housing on it over the other Frame Side.
Again, finger tighten the M6 x 25mm Socket
Button Head Cap Screw. You will adjust this later,
after your carriage is on the frame. (See Fig. 6-C
and 6-D).
Fig. 6-A
Belt Clamp
Assembly
front tr
ack support
Fig. 6-B
M6 x 25mm
Socket Button
Head Cap Screw
front of f
rame
Fig. 6-D
Fig. 6-C
Belt Tensioner
Housing Assembly
M6 x 25mm
Socket Button
Head Cap Screw
front tr
ack support
front of f
rame
