Pg. 50
Step 7: Mounting Clamp to Frame Assembly
Parts Needed:
1- Belt Clamp Assembly
1- Belt Tensioner Housing Assembly
7-1
. Slide the Belt Clamp Assembly (assembled
in Step 4) over the Left or Right Frame Side,
toward the front track support. Finger tighten the
M6 x 25mm Socket Button Head Cap Screw. You
will adjust this later, after your carriage is on the
frame. (See Fig. 7-A and 7-B).
7-2 .
Slide the Belt Tension Clamp with the Belt
Tension Housing on it over the other Frame Side.
Again, finger tighten the M6 x 25mm Socket
Button Head Cap Screw. You will adjust this later,
after your carriage is on the frame. (See Fig. 7-C
and 7-D).
Fig. 7-A
Belt Clamp
Assembly
front tr
ack support
Fig. 7-B
M6 x 25mm
Socket Button
Head Cap Screw
front of f
rame
Fig. 7-D
Fig. 7-C
Belt Tensioner
Housing Assembly
M6 x 25mm
Socket Button
Head Cap Screw
front tr
ack support
front of f
rame
