Application of
Disassembly
3 - 25
Bobbin winding mechanism
Application o
f
Disassembly
Application of Disassembly
7. Remove the two screws (taptite, bind B M3x8) to remove the sub spool pin holder. Remove the screw
(screw, bind M3x3) to remove the notch plate from the sub spool pin holder.
8. Pull out the shaft from the sub spool stand pin, and remove the sub spool stand pin.
9. Remove the screw (screw, pan (S/P washer) M3x8) to remove the tension guide assy.
10.Remove the screw (taptite, bind B M3x8), and pull out the thread guide supporting plate.
Screw, Pan (S/P washer) M3X8
Taptite, Bind B M3X8
Screw, Bind M3X3
Thread guide supporting plate
Tension guide assy
Screw, pan (S/P washer)
M3x8
Taptite, bind B M3x8
Notch plate
Screw, bind M3x3
Sub spool pin holder
Shaft
Sub spool stand pin
Bobbin winder unit cover
Taptite, bind B M3x8
Taptite, bind B M3x8
Sub spool pin holder
Shaft
Summary of Contents for BLDY
Page 2: ......
