Application of
Disassembly
3 - 39
Lower driving mechanism
Application o
f
Disassembly
Application of Disassembly
1
Removal of Reversal link assy, Pull link and Reversal link plate assy
1. Remove the retaining ring E3 from the shaft of reversal link plate assy, remove the retaining ring E2.5
from the shaft of reversal link assy, and then remove the reversal link assy from the reversal link plate
assy.
2. Turn the pull link 90 degrees to align the notch with the tab of drop lever Q, and remove the pull link
from the drop lever Q.
3. Remove the screw (screw, bind M4x8) to remove the reversal link plate assy from the feed module.
Screw, Bind M4X8
Retaining ring E3
Reversal link assy
Reversal link plate assy
Tab
Retaining ring E2.5
Pull link
Notch
Drop lever Q
Screw, bind M4x8
Feed module
Summary of Contents for BLDY
Page 2: ......
