Application of
Disassembly
3 - 53
Feed module
Application o
f
Disassembly
Application of Disassembly
5
Removal of FPM holder assy, F INIT PCB assy and Feed adjuster gear assy
1. Loosen the screw (set screw, socket (CP) M4x4), and remove the screw (bolt, socket M4x25) to
remove the spring (XC2537). Remove the two screws (screw, bind M4x8) to remove the stopper plate,
and then remove the FPM holder assy.
2. Remove the screw (screw, bind M3x5) to remove the F INIT PCB assy from the FPM sensor plate.
Remove the screw (screw, bind M3x5) to remove the FPM sensor plate from the FPM holder assy.
Bolt, Socket M4X25
Screw, Bind M3X5
Screw, Bind M4X8
SPRING (XC2537)
Set Screw, Socket (CP) M4X4
FPM holder assy
Screw,
bind M3x5
F INIT PCB assy
Screw, bind M4x8
Stopper plate
FPM sensor plate
Spring (XC2537)
Bolt, socket M4x25
Screw, bind M3x5
Set screw, socket
(CP) M4x4
Summary of Contents for BLDY
Page 2: ......
