Application of
Disassembly
3 - 102
Dual feed assy
Application o
f
Disassembly
Application of Disassembly
1
Disassembly of Dual feed assy
1. Remove the DF foot assy.
2. Remove the screw (screw, pan (S/P washer) M26x8 DA) and screw (taptite, bind B M3x10) to remove
the DF cover R and changeover thumb.
3. Remove the two screws (taptite, bind M26x5) to remove the pulley plate B, washer thrust2 (two
location), and DF belt.
*Key point
• When removing the pulley plate B, remove it from the two bushings while keeping a horizontal state.
Taptite, Bind B M3X10
Screw, Pan (S/P washer) M26X8 DA
DF foot assy
Changeover thumb
Screw, pan (S/P washer)
M26x8 DA
DF cover R
Taptite bind B M3x10
Taptite, Bind M26X5
Taptite, bind M26x5
DF belt
Pulley plate B
Washer thrust2
Summary of Contents for BLDY
Page 2: ......