Application of
Assembly
3 - 144
Main frame and covers
Application o
f
Assembly
Application of
Assembly
9-7 Attachment of Buttons, SS PCB assy and Threader switch PCB assy
1. Set the LED cover, operation button A, operation button B, SS-button and SS PCB assy to the front
cover assy, and secure them with the four screws (taptite, bind B M3x8).
2. Set the threader button and threader switch PCB assy to the front cover assy, and secure them with the
two screws (taptite, bind B M3x8).
3. Attach the front TG cover fixed plate to the front cover assy with the two screws (taptite, bind B M3x8).
4. Connect the two connector of SS PCB lead wire to the CN1 and CN6 on the panel PCB assy.
5. Connect the connector of threader switch PCB lead wire to the CN3 on the panel PCB assy.
6. Pass the each lead wire through the securing fixtures, and bind up them with the band.
*Key point
• Refer to
Right side of Front cover assy".
Taptite, Bind B M3X8
Threader switch PCB lead wire
LED cover
Taptite, bind B M3x8
Front TG cover fixed plate
Operation button A
Taptite, bind B M3x8
Taptite, bind B M3x8
Band
SS PCB assy
Threader switch
PCB assy
SS button
Operation button B
Threader button
Front cover assy
Summary of Contents for BLDY
Page 2: ......
