Application of
Assembly
3 - 180
Feed module
Application o
f
Assembly
Application of
Assembly
2
Attachment of Stopper plate block assy and Feed arm assy
1. Align the shaft of stopper plate block assy with the positioning hole of base plate assy, and attach the
stopper plate block assy to the base plate assy with the screw (screw, bind M4x5).
2. Set the feed arm assy to the base plate assy, and insert the horizontal feed shaft into the base plate
assy, washer thrust, feed arm assy, washer thrust and base plate assy, then attach the retaining ring
E5. Set the set screw collar to the horizontal feed shaft, and secure it with the screw (set screw, socket
(CP) M4x4) while pushing the horizontal feed shaft to the left side.
3. Align the boss of shaft stopper plate with the positioning hole of base plate assy, and attach the shaft
stopper plate to the base plate assy with the screw (screw, bind M3x5).
Screw, Bind M3X5
Screw, Bind M4X5
Set Screw, Socket (CP) M4X4
Washer thrust
Feed arm assy
Set screw, socket (CP) M4x4
Set screw collar
Washer thrust
Retaining ring E5
Horizontal feed shaft
Screw, bind M4x5
Stopper plate block assy
Screw, bind M3x5
Shaft stopper plate
Horizontal feed shaft
Base plate assy
Retaining ring E5
Washer thrust
Feed arm assy
Base plate assy
Summary of Contents for BLDY
Page 2: ......