Application of
Assembly
3 - 182
Feed module
Application o
f
Assembly
Application of
Assembly
6. Align the boss of FPM sensor plate with the positioning hole of FPM holder assy, and attach the FPM
sensor plate to the FPM holder assy with the screw (screw, bind M3x5). Align the notch of F INIT PCB
assy with the boss of FPM sensor plate, and attach the F INIT PCB assy to the FPM sensor plate with
the screw (screw, bind M3x5).
7. Insert the feed regulator slide shaft into the groove of feed adjuster gear assy, and then set the shaft
bushing of FPM holder assy to the mounting position of base plate assy. Attach the stopper plate to the
base plate assy with the two screws (screw, bind M4x8).
8. Set the spring (XC2537) between the FPM holder assy and the base plate assy, and tighten the screw
(bolt, socket M4x25).
9. Fully tighten the screw (set screw, socket (CP) M4x4).
Bolt, Socket M4X25
Screw, Bind M3X5
Screw, Bind M4X8
SPRING (XC2537)
Set Screw, Socket (CP) M4X4
FPM holder assy
Screw,
bind M3x5
F INIT PCB assy
Screw, bind M4x8
Stopper plate
FPM sensor plate
Spring (XC2537)
Bolt, socket M4x25
Screw, bind M3x5
Mounting position
Feed regulator slide shaft
Set screw, socket
(CP) M4x4
Feed adjuster
gear assy
Base plate assy
Summary of Contents for BLDY
Page 2: ......
