Application of
Assembly
3 - 183
Feed module
Application o
f
Assembly
Application of
Assembly
4
Attachment of Drop assy and Lower shaft B assy
1. Set the set screw collar, washer thrust, lower shaft bushing and another washer thrust to the lower
shaft B assy, and attach the retaining ring E6.
2. Tighten the two screws (set screw, socket (CP) M4x4) while pushing the set screw collar to the left side.
3. Set the lower shaft bushing to the lower shaft B assy.
*Key point
• Check that the set screw collar is the outside of the cut surface.
• Check that the lower shaft bushing is not wobbled, and it moves smoothly.
Set Screw, Socket (CP) M4X4
Lower shaft B assy
Set screw collar
Lower shaft bushing
Retaining ring E6
Washer thrust
Set screw, socket
(CP) M4x4
Lower shaft bushing
Washer thrust
Summary of Contents for BLDY
Page 2: ......