Application of
Assembly
3 - 185
Feed module
Application o
f
Assembly
Application of
Assembly
5
Alignment of Feed adjuster gear assy and F initial shutter position
1. When the feed adjuster gear assy comes in contact with the lower shaft B assy and the gap between
the F initial shutter and lower shaft B assy is 0.25 to 0.85 mm, fully tighten the screw (set screw, socket
(CP) M4x4).
Set Screw, Socket (CP) M4X4
Feed adjuster gear assy
Lower shaft
B assy
0.25 - 0.85 mm
Set screw, socket (CP) M4x4
F initial shutter
Lower shaft B assy
Summary of Contents for BLDY
Page 2: ......
