Application of
Assembly
3 - 193
Embroidery unit
Application o
f
Assembly
Application of
Assembly
3
Attachment of X INIT PCB assy and XY pulse motor assy
1. Slide the X carriage assy to the center position.
2. Attach the X INIT PCB assy to the main frame assy with the screw (screw, bind M3x6).
3. Set the X INIT PCB assy lead wire to the securing fixtures, and bind up it to the main frame assy with
the band.
*Key point
• Refer to
4. Connect the XPM lead wire assy to the XY pulse motor assy.
5. Attach the XY pulse motor assy to the main frame assy with the two screws (screw, pan (S/P washer)
M3x7).
Screw, Pan (S/P washer) M3X7
Screw, Bind M3X6
Screw, pan (S/P washer) M3x7
X INIT
PCB assy
Screw, bind M3x6
X INIT PCB assy lead wire
X carriage assy
Main frame assy
XY pulse motor assy
XPM lead wire assy
Band
Summary of Contents for BLDY
Page 2: ......
